EPOXY INSULATORS

High Voltage Standoff Busbar Insulator Epoxy Resin Insulators

Here are key characteristics and features of high voltage standoff busbar insulator epoxy resin insulators:

1. Electrical Insulation: The primary function of these insulators is to electrically insulate the busbars, preventing unintended electrical contact with grounded surfaces or neighboring conductors. This is critical in high-voltage systems to avoid short circuits or electrical faults.
2. Material: Epoxy resin is commonly used as the insulating material due to its excellent dielectric properties and resistance to electrical breakdown. It provides high levels of insulation and reliability.
3. High Voltage Rating: Standoff busbar insulators are specifically designed for high-voltage applications, and they come in various voltage ratings to match the system’s requirements.
4. Mechanical Strength: These insulators provide mechanical support to the busbars, helping to maintain their position and alignment within the equipment. They must be able to withstand mechanical stresses caused by vibration, thermal expansion, and other factors.
5. Corrosion Resistance: Epoxy resin insulators are typically resistant to moisture and chemicals, making them suitable for use in outdoor and harsh environments where exposure to the elements is a concern.
6. Customizable Design: Standoff busbar insulators can be designed in various shapes and sizes to accommodate different busbar configurations and installation requirements.
7. Testing and Compliance: These insulators must undergo rigorous testing to ensure they meet industry standards and safety requirements, such as those set by ANSI, IEC, or other relevant standards organizations.
8. Applications: High-voltage standoff busbar insulator epoxy resin insulators are commonly used in a wide range of high-voltage equipment, including switchgear, circuit breakers, power transformers, and substations.

Voltage:	35kv
Height:	360mm
Diameter:	130mm
Screw:	3-M10
Material:	Epoxy resin
MOQ:	50pcs
Certificate:	CE, RoHS, REACH

High voltage standoff insulator description

The variety of high voltage insulator listed in sample all adopt epoxy vacuum pouring technology for one-time molding, kinds of bushing、contact box、insulating cylinder and bell housing etc adopt APG technology for molding. While ,some product adopt SMC、DMC un-saturatuon alkyd enlargement mode plastic for compacting molding. All the product are applied to3.6~40.5KV mid-large volt switchboard.

For some product and specification size owning special requirement ,it could be designed and manufactured according to user demand.

Application

Applicable to all shopping malls, supermarkets, national grids, substations, power energy, urban power and other fields.

Mainly used in switch cabinets, power stations, outdoor high voltage, switchgear,etc.

Our service